AgfaPhoto AS 1300 User Manual page 17

4. Adjust the Scanning Attributes (Size, Mode, Resolution, Brightness,
Contrast and Gamma).
5. Select a printer from the Printer drop-down menu; drag the Scaling Slider Bar,
check the Fit-in box or check Center on Page box, if appropriate.
Note: The Printer menu is enabled only for the Copy function. If you select
other functions, please skip to the step7.
6. Click the Default button if you desire to return to the default settings.
7. Click the Close button to save the final settings and exit the DigiScan window.
Add Other Image Editing Software
To add more image editing functions for the SCAN button, follow the steps
described below:
1. Click the button
2. Click Add button in the prompted out window to select an existing application
from your system.
3. The program name you have chosen displays in the list.
Note: You are allowed to add at most 3 image editing software in this list.
4. Click Edit button to rename the displayed name of the application, if desired.
5. Click Remove button to remove the option you have created, if necessary.
6. Click Close to accept the changes and close the window.
at the far right end of the Purpose drop-down menu.
14