Status Indicator
The green LED indicator (located between the Scan and Custom buttons)
indicates the status of the scanner, as described below:
Light
On
The scanner is connected with the computer, ready to scan images.
Flashing
The scanner is busy scanning.
Off
The scanner is off, either because of disconnection with the
computer, or because the computer being turned off.
Scanner Connection
The first step to take when troubleshooting connection problems with your
scanner is to check all physical connections. The DigiScan icon
Windows system tray, indicates if the scanner software is properly launched and the
scanner and computer are communicating with each other.
Appearance
No Display
If the Windows system starts and detects the scanner unconnected, the following
message will appear to remind you (The scanner illustration(s) may appear different
than from the actual scanner itself.):
The DigiScan program has been successfully launched and the
scanner is connected with the computer, ready to scan mages.
The scanner is not connected with the computer.
You have chosen to terminate the DigiScan program, no matter
the scanner is connected or disconnected with the computer.
30
Status
Status
, located on the