Olympus Camedia AZ-1 Reference Manual page 23

Memory gauge
The memory gauge lights up when the camera is storing a still picture you have just
taken on the card. The memory gauge indication changes as shown below depending
on the shooting status.
If the memory gauge is fully lit, wait a few seconds until it goes off to take the next
shot.
Shooting
Wait
Before
shooting
(Gauge is off)
Battery check
If the remaining battery power is low, the battery check indication changes as follows
when the camera is turned on or while the camera is in use.
Lights (green)
Remaining power
level: High*
* Your digital camera's power consumption varies greatly depending on usage and operating
conditions. Under some operating conditions, the camera may turn off without warning that
battery power is low. If this occurs, re-charge the battery.
Shooting
Wait
One picture is taken
(Lit)
Lights (red)
Remaining power level: Low.
Charge the battery.
Monitor indications
Memory gauge
Shooting
Wait
No more pictures can
be taken (Fully lit).
Wait until the gauge
returns to the status on
the left to take the next
shot.
BATTERY EMPTY
is displayed.
Remaining power level:
Exhausted.
Charge the battery.
23