Pixel Mapping - Checking The Image Processing Functions - Olympus Camedia AZ-1 Reference Manual

Selecting functions from the SETUP menu
PIXEL MAPPING — Checking the image processing functions
The pixel mapping feature allows the camera to check and adjust the CCD and image
processing functions. It is not necessary to operate this function frequently. Approximately
once a year is recommended. After taking pictures or playing them back, wait for at least
one minute before using the pixel mapping function to ensure that it operates correctly.
Available modes
Select PIXEL MAPPING from the
SETUP menu.
Rotate to
select
Press to confirm
7
MENU/OK
Press to confirm
MENU/OK
If you accidentally turn the camera off during pixel mapping, be sure to operate
pixel mapping again.
130
~
P. 114
SETUP
1
BEEP
LOW
PIXEL MAPPING
BACK
EXIT SELECT
SETUP
BEEP
PIXEL MAPPING START
BACK
CANCEL
Notes on pixel mapping
MENU/OK button
GO OK
OK
GO
This bar is displayed to show the
progress of pixel mapping.
Control dial
BACK/NEXT
button
Mode switch