Bluetooth Connection Settings; Send Data Using Bluetooth Technology - Nokia 5500 Sport User Manual

Bluetooth connection
settings
Select Menu > Connect.
Bluetooth.
When you activate Bluetooth
technology for the first time, you
are asked to give a name to your
phone.
Bluetooth — to switch Bluetooth
On/Off
My phone's visibility
all — to allow your phone to be
found by other Bluetooth devices.
For security reasons it is advisable
to use the Hidden
whenever possible.
My phone's name
name for your phone.
Remote SIM mode
enable the usage of the SIM card
of the phone by another device
(for example a car kit) by
Bluetooth technology (SIM Access
Profile SAP)
When the wireless device is in the
remote SIM mode, you can only
use a compatible connected
enhancement, such as a car kit, to
make or receive calls. Your
wireless device will not make any
calls, except to the emergency
numbers programmed into your
device, while in this mode. To
make calls from your device, you
>
> Shown to
setting
— to define a
> On — to
Copyright © 2006 Nokia. All rights reserved.
C o n n e c t i v i t y
must first leave the remote SIM
mode. If the device has been
locked, enter the code to unlock it
first.
Send data using Bluetooth
technology
There can be only one active
Bluetooth connection at a time.
1. Open an application where the
item you wish to send is stored.
For example, to send a photo to
another device, open the
gallery application.
2. Scroll to the item you want to
send, and select
Send > Via Bluetooth.
3. The phone starts to search for
devices within range. Paired
devices are shown with
To interrupt the search, select
Stop. The device list freezes,
and you can start to form a
connection to one of the
devices already found.
When searching for devices,
some devices may show only
the unique device addresses. To
find out the unique address of
your phone, enter the code
*#2820# in the standby mode.
If you have searched for
devices earlier, a list of the
devices that were found
Options >
.
89