Packet Data - Nokia 5500 Sport User Manual

T o o l s
speed when a data call connection
is used. During the connection, the
operating speed may be less,
depending on network conditions.
Select Options > Advanced
settings to change the following
options:
Network type (for packet data
only) — the Internet protocol (IP)
version of the network:
IPv6. The other settings depend on
the selected network type.
IPv4 settings and
(for data call only) — the Internet
protocol settings. The settings
depend on the network type.
Phone IP address
enter the IP address of your phone
DNS address — to enter the IP
address of the primary and
secondary DNS servers
Proxy serv. address
IP address of the proxy server
Proxy port number
port number of the proxy server
The following settings are shown if
you have selected data call as the
connection type:
Use callback > Yes
server to call you back once you
have made the initial call. Contact
your service provider to subscribe
to this service.
76
Copyright © 2006 Nokia. All rights reserved.
IPv4 or
IPv6 settings
(for IPv4) — to
— to enter the
— to enter the
— to allow a
The phone expects the callback
call to use the same data call
settings that were used in the
callback-requesting call. The
network must support that type of
call in both directions, to and from
the phone.
Callback type — The options are
Use server no. and
Callback number — to enter your
phone number which the
dial-back server uses.
Use PPP compress.
data transfer, select
supported by the remote PPP
server.
Use login script >
login script when establishing the
connection
Login script —to insert the login
script
Modem initialisation
initialization string) — to control
your phone using modem AT
commands. If required, enter
commands specified by your
service provider or Internet service
provider.

Packet data

The packet data settings affect all
access points using a packet data
connection.
Use other no..
— To speed up
Yes if
Yes — to use a
(modem