Security - Nokia 5500 Sport User Manual

T o o l s
date and time format and
separators, select
Settings > Date and time
from the following options:
Time and Date — to set the time
and date
Time zone — to set the time zone
of your location. If you set
Network operator time
update, the local time is shown.
Date format — to select the
format to display dates
Date separator — to select the
date separator
Time format — to select between
24-hour and 12-hour time format
Time separator — to select the
time separator
Clock type — to select whether the
analog or digital clock is shown in
the standby mode. See
63.
Clock alarm tone
alarm clock tone
Network operator time
service) — to allow the network to
update time, date, and time zone
information to your phone. If you
select Auto-update, all active
connections are disconnected.
Check any alarms as these may be
affected.
78
Copyright © 2006 Nokia. All rights reserved.
Menu > Tools >
and
> Auto-
"Clock" p.
— to select the
(network

Security

Phone and SIM
You can change the following
codes: lock code, PIN code, and
PIN2 code. These codes can only
include the numbers from 0 to 9.
Avoid using access codes similar to
emergency numbers, to prevent
accidental dialing of the
emergency number.
To set the security settings, select
Menu > Tools > Settings
Security > Phone and SIM
from the following options:
Code in use — to select the active
code, PIN or UPIN, for the active
USIM. This is shown only if the
active USIM supports UPIN, and
the UPIN is not rejected.
PIN code request (or
request) — to set the phone to
request the code each time the
phone is switched on. Some SIM
cards may not allow the PIN code
request to be turned Off. If you
select Code in use
code request is shown instead.
PIN code (or UPIN
code /Lock code — to change the
codes
Autolock period — to set a
time-out after which the phone is
automatically locked. To use the
phone again, you need to enter the
>
and
UPIN code
> UPIN, UPIN
code) /PIN2