Clear System Event Log - ADTRAN ATLAS 800 SERIES System Manual

ATLAS 800 Series System Manual

Clear System Event Log

Write security: 3; Read security: 3
Clears the event log. Select
After clearing the event log, data cannot be retrieved.
Ethernet Port
Read security: 5
Displays status information about the Ethernet port. An asterisk (*) indicates activity for the item. The
following read-only fields are available to review:
I/F Status
Tx Frames
Rx Frames
Ethernet Rate
Admin Port
Write security: 2; Read security: 5
Displays the status of the
Signal Leads
Tx Bytes
Rx Bytes
Overrun Errs
Framing Errs
Clear Counters
61200780L1-1C
to clear the log or
Y N
Confirm (y/n)
This will clear the entire event log.
Indicates the current status of the Ethernet port.
Indicates the number of frames transmitted from the Ethernet port since system
startup.
Indicates the number of frames received on the Ethernet port since system
startup.
Indicates whether the Ethernet network is 10 or 100BaseT.
ADMIN port.
Displays the state of the
Displays the number of bytes transmitted from the
Displays the number of bytes received by the
Displays the number of overrun errors received by the
Displays the number of framing errors received by the
Clears the ADMIN port statistics. Press
© 2004 ADTRAN, Inc.
System Status Menu Descriptions
to exit the command. The following prompt displays:
ADMIN port signals ( RTS
ADMIN
Y to activate this command.
Clear System Event Log
, CTS , DTR , and DCD ).
ADMIN port.
port
ADMIN port.
ADMIN port.
77