Problem Solving Guide - Miele KM 406 Operating Instructions Manual

Repairs to the gas and electrical
components of this appliance must
only be carried out by a suitably
qualified and competent person in
strict accordance with current local
and national safety regulations to
ensure safety. Unauthorised repairs
could be dangerous. The
manufacturer cannot be held liable
for unauthorised work.
However, some minor problems can be
resolved as follows:
What to do if ...
... the burner does not ignite after
several attempts
Check whether
– the burner is correctly assembled.
– the gas supply tap is turned on.
– the burner is dry and clean.
– the flame slits are clean and
unblocked.
– The mains fuse has blown. If this is
the case, call an electrician or the
Service Department. (The gas can
be lit with a match). See "Use during
a power cut".

Problem solving guide

... the gas flame goes out after being
lit
Check whether the burner covers are
correctly assembled.
... the ignitor on the burner does not
spark
Check whether food deposits have
lodged themselves between the ignitor
and the burner cover.
Carefully remove any soiling. Do not let
the ignitor get wet.
... the flame suddenly looks different
Check whether the burner is correctly
assembled.
21