Miele CVA 5060 Installation And Maintenance Manual page 37

– Take the machine out of the niche and drill ø 4.5 mm holes,
2 mm deep where you made the indentations.
^ Plumb the machine into the mains water supply (plumbed
in models only).
^ Connect the machine to the electricity supply.
^ Push it all the way into the niche until you feel resistance.
^ Open the machine door and partially tighten the side
socket screws.
^ Carefully turn the lower socket screws a to centre the
machine in the niche.
^ Tighten both upper socket screws b by hand to secure the
machine in the unit. Do not overtighten them.
Installation
37