Miele CVA 5060 Installation And Maintenance Manual page 10

Problem solving guide
10
. . . too much crema has formed and is overflowing above
the coffee spouts.
Some types of coffee will produce too much crema if the
coffee or espresso temperature is set to maximum and the
amount of coffee to be ground is set too high.
^ Set a lower temperature and reduce the amount of coffee
to be ground.
. . . the slide control for the grinder setting will not move.
^ Close the machine door and dispense a cup of espresso
coffee.
The grinder setting slide control will now move.
. . . the brew unit cannot be removed.
The brew unit is not in the correct position.
^ Close the door and switch the machine on.
The brew unit will position itself correctly.
. . . the message "Fault - 73" appears in the display.
The brew unit is dirty and cannot be positioned correctly.
^ Touch the OK sensor.
^ Take the brew unit out of the machine and clean it
thoroughly (see "Cleaning and care - Brew unit").
^ Replace the brew unit in the machine and close the door.
If this fault message still continues to appear in the display,
please call the Miele Service department, quoting the fault
code.
. . . the message "Fault -76" appears in the display.
The brew unit is dirty.
^ Clean the brew unit (see "Cleaning and care: Brew unit").