Miele CVA 5060 Installation And Maintenance Manual page 29

^ When a message asking you to fill the water container
with fresh water appears, you should remove the
container and rinse it out thoroughly with clean water. Make
sure all traces of descaling agent are removed, and then fill
it up to the k mark with clean drinking water.
Water will flow out of the spouts during the rinsing process.
Because the inside of the machine is also cleaned during this
process you will be prompted to Empty the drip tray at the
end.
When descaling has been completed, Programme finished
will appear in the display. Follow the instructions in the
display. The machine will then run a short rinsing cycle.
Plumbed in machines will automatically revert to using the
plumbed in water supply if it was set up to do so before
the descaling programme was run.
Descaling the machine
29