Cleaning And Care; General Notes - Miele CS 1011 Operating And Installation Instructions

Cleaning and care

Miele offer a range of branded cleaning
and conditioning agents for your hob.
See "Optional accessories".

General notes

,
Do not use a steam cleaning
appliance to clean this appliance.
The steam could reach electrical
components and cause a short
circuit.
The appliance should be cleaned after
each use. Let it cool down to room
temperature before cleaning.
To avoid water marks and limescale
deposits, use a soft cloth to dry
surfaces that have been cleaned with
water.
Food which boils over onto the hot hob
can cause the burner components and
the stainless steel surface of the hob to
discolour. Remove any soiling
immediately.
30
To avoid damaging the surface of
your appliance, do not use:
– cleaning agents containing soda,
alkalines, ammonia, acids or
chlorides,
– cleaning agents containing
descaling agents,
– stain or rust removers,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– solvent-based cleaning agents,
– dishwasher cleaner,
– grill and oven cleaners,
– glass cleaning agents,
– hard, abrasive brushes or sponges,
e.g. pot scourers, or sponges which
have been previously used with
abrasive cleaning agents,
– sharp pointed objects
(these can damage the seal between
the frame and the worktop)
– melamine eraser blocks.