At The End Of A Programme; Switching Off; Unloading The Dishwasher; Interrupting A Programme - Miele G 1672 Operating Instructions Manual

At the end of a programme

At the end of a programme the in
operation indicator light flashes on and
off slowly. It is visible even with the door
closed.
It will stop flashing one hour after the
programme has finished.
Programme finished
If the message
Drying plus
comes up in the display,
and the door has opened slightly, this
indicates that the programme has
finished.
You can now empty the dishwasher.
,
If you have deselected the auto-
matic door opening function (see
Settings menu, Drying plus), but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully. Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.

Switching off

At the end of a programme:
^ Open the door.
^ Switch the dishwasher off with the Off
button V.
The dishwasher will continue to use
electricity until it is switched off with
the Off button V.
If the dishwasher is not going to be
used for a longer period of time, e. g.
whilst on holiday, the stopcock should
be turned off.

Unloading the dishwasher

Dishes tend to break and chip more
easily when they are hot.
Allow the dishes to cool until they are
comfortable enough to handle before
unloading them.
If you open the door fully after switching
or off, the dishes will cool much faster.
First unload the lower basket, then the
upper basket and finally the cutlery tray
(depending on model).
This will prevent water drops from the
upper basket and cutlery tray from
falling onto the dishes in the lower
basket.

Interrupting a programme

A programme is interrupted as soon as
the door is opened.
When the door is closed again, the
programme will continue from the point
it was at before the door was opened.
,
Water in the dishwasher may be
hot. Danger of scalding.
Only open the door if absolutely
necessary and exercise extreme
caution when doing so. Before
closing the door again, leave it ajar
for approx. 20 seconds. This will
enable the temperature in the wash
cabinet to settle. Then close the
door firmly, making sure that the
catch engages.
Operation
39