Problem solving guide
With the aid of the following guide, faults in the performance of the appliance,
some of which may result from incorrect operation can be put right without
contacting the Service Department.
,
Repairs should only be carried out by a suitably qualified and trained
person in strict accordance with current local and national safety regulations.
Unauthorised or incorrect repairs could cause personal injury or damage to the
appliance.
Technical problems
Problem
The dishwasher does
not start.
The dishwasher stops
during a programme.
After the programme
has started, the
In-operation indicator
light is not visible.
48
Possible cause
The door is not properly
closed.
The appliance is not
plugged in.
The fuse has tripped.
The appliance is not
switched on.
A programme has not
been selected.
The fuse has tripped.
The reflector panel was
not correctly fitted.
Remedy
Push the door firmly shut.
Insert the plug and switch
on at the socket.
Reset or replace the fuse.
(Minimum fuse rating -
see data plate).
Press the On button U , and
select a programme.
Select the programme
you want.
Reset or replace the fuse.
Re-fit the reflector panel
correctly (see Installation
diagram).