Initial Camera Setup - Vivitar ViviCam X029-12MP User Manual

Initial Camera Setup

Installing the Battery
To Charge the Battery:
 Insert the battery as shown above.
 Power off the camera.
 Connect the camera using the supplied
USB cable to the computer‟s USB port or
to the AC Adapter (which is then
connected to a standard wall socket).
 The charge light will turn off when the
battery is fully charged.
Turning On the Camera
Installing Memory Card
 SD Memory card (up to32GB) needed
for normal use.
 Insert the SD memory card, as shown
above, until a click is heard.
Using the Camera
4
Accessing the menu