Vivitar ViviCam X029-12MP User Manual page 58

Firmware Menu
Use this menu to view the Firmware version on your camera or to reset your camera settings to
the Factory Default Settings.
1) Press the SET button to open the menus for the current mode.
2) Press the LEFT or RIGHT direction control button to scroll and select the chosen menu.
3) The "Default Setting" is selected.
4) Press the SET button to reset the camera to the factory default settings.
5) You will be asked to confirm your wish to restore all of the factory settings.
6) Press the UP or DOWN button to select "Yes" and press the SET button to begin the format.
The top Multi-Function Key 1 is inactive for this menu.
7) The camera will be reset.
8) A message will appear indicating that the settings have been reset successfully.
57