Initial Camera Setup - Vivitar ViviCam X029-12MP User Manual

Initial Camera Setup

When powering the camera ON for the first time the camera will take you through the initial
camera setup.
Powering the Camera ON
1) Make sure the battery has been inserted properly and fully recharged.
The battery must be inserted all the way. The battery latch should cover the battery if inserted
correctly.
Note:

Some features, such as Flash, will not work if the battery power level is low.

When the battery power is low the battery icon turns red and the camera will
automatically turn off a few seconds later.

The energy status of the power is displayed on LCD as shown below:
Full battery power Medium battery power
10
Low battery power