Example Filter - ZyXEL Communications Prestige 642M series User Manual

Field Description
Log Select the logging option from the following:
None – No packets will be logged.
Action Matched - Only packets that match the rule parameters will
be logged.
Action Not Matched - Only packets that do not match the rule
parameters will be logged.
Both – All packets will be logged.
Action Select the action for a matching packet.
Matched
Action Select the action for a packet not matching the rule.
Not
Matched
Once you have completed filling in Menu 21.1.2 - Generic Filter Rule, press [Enter] at the message
[Press Enter to Confirm] to save your configuration or press [Esc] to cancel. This data will now be
displayed on Menu 21.1 - Filter Rules Summary.
5.4

Example Filter

Let's look at an example filter. Please see our supporting disk for more example filters.
Step 1. Enter 21 from the Main Menu to open Menu 21 - Filter Set Configuration.
Step 2.
Enter the index of the filter set you wish to configure (in this case, 1) and press [ENTER]
Step 3. Enter a descriptive name or comment in the Edit Comments field (in this case test) and press
[ENTER].
Step 4. Press [ENTER] at the message: [Press ENTER to confirm] and to open Menu 21.1 - Filter
Rules Summary.
Step 5.
Enter 1 to configure the first filter rule (the only filter rule of this set). Make the entries in this
menu as shown in the following figure.
Filter Configuration
Prestige 642M Series ADSL Bridge
Option
None
Action
Matched
Action Not
Matched
Both
Check Next
Rule
Forward
Drop
Check Next
Rule
Forward
Drop
.
5-7