5.2
Configuring a Filter Set
To configure filter sets or a filter set, follow the procedure below.
Step 1.
Enter 21 from the Main Menu to open Menu 21 - Filter Set Configuration.
Filter
Set #
------
------------------
1
test
2
______________
3
______________
4
______________
5
6
Step 2.
Enter the index of the filter set you wish to configure (no. 1-12) and press [Enter].
Step 3.
Enter a descriptive name or comment in the Edit Comments field and press [Enter].
Step 4.
Press [Enter] at the message "Press ENTER to Confirm or ESC to Cancel" to open Menu 21.1
- Filter Rules Summary.
Filter Configuration
Menu 21 - Filter Set Configuration
Comments
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel:
Figure 5-2 Menu 21 - Filter Set Configuration
Prestige 642M Series ADSL Bridge
Filter
Set #
Comments
------
------------------
7
______________
8
______________
9
______________
10
______________
11
______________
12
______________
5-3