Table of Contents
Advertisement
ZOTAC ZBOX nano
Getting to know your ZOTAC ZBOX nano
Front view
Refer to the diagram below to identify the components on this side of the system
1. Power switch
The power switch turns the mini-PC ON and OFF.
2. HDD status indicator
The HDD status indicator shows when the hard disk is transfering data.
3. WiFi status indicator
The WiFi status indicator shows when the WiFi is transfering data.
4. IR receiver
The IR receiver is used to receive the signal from the IR remote control.
5. 6-in-1 Memory card slot
The built-in memory card reader reads and writes MMC/SD/SDHC/MS/MS Pro/xD
cards used in devices such as digital cameras, MP3 players, mobile phones and
PDAs.
6. Headphone/Audio output jack
The stereo headphone jack (3.5mm) is used to connect the system's audio out
signal to analog headphones or amplified speakers.
7. Microphone jack
The microphone jack is designed to connect a microphone for video conferencing,
voice narrations or simple audio recordings.
Note 1: The power adapter may become warm to hot when in use. Do not cover the adapter and keep it
away from your body.
Note 2: Due to the special design for easy upgrade, some connectors are placed upside down.
6
3
1
2
4
5
6
7
Advertisement
Table of Contents
