Getting To Know Your Zotac Zbox Nano; Front View - Zotac ZBOX nano User Manual

Hide thumbs Also See for ZBOX nano:
Table of Contents

Advertisement

ZOTAC ZBOX nano

Getting to know your ZOTAC ZBOX nano

Front view

Refer to the diagram below to identify the components on this side of the system
1. Power button
The power button turns the mini-PC ON and OFF.
2. HDD status indicator
The hard disk LED blinks when data is being written onto or read from the hard
disk drive.
3. Wi-Fi status indicator
The Wi-Fi LED blinks when data is being transfered over Wi-Fi.
4. Memory card reader
The built-in memory card reader reads SD/SDHC/SDXC cards used in devices
such as digital cameras, MP3 players, mobile phones and PDAs.
5. Combo analog/mini-Optical S/PDIF output
The Combo analog/mini-Optical S/PDIF output (3.5mm) is used to connect the
system's audio out signal to amplified speakers or headphones. It also supports
SPDIF output with the headphone/SPDIF adapter included in the package. The
optical SPDIF output enables connecting the ZBOX nano to digital audio receivers
and speakers for crystal clear digital audio and surround sound from compatible
soundtracks.
6. Microphone input
The microphone input is designed to connect a microphone for video conferencing,
voice narrations or simple audio recordings.
7. IR receiver
The integrated IR receiver is used to receive signals from the IR remote control.
8. USB 3.0 ports
The USB 3.0 ports support the SuperSpeed USB 3.0 devices and are backwards
compatible with USB 2.0/1.1 devices. Use the ports for USB 3.0 devices for
maximum performance with USB 3.0 compatible devices.
6
1
3
2
4
5
7
6
8

Advertisement

Table of Contents
loading

Table of Contents