Zoom RFX-1100 Operation Manual page 5

OUTPUT
FS01
R L
Send/Return Connection
This is an example for connecting the RFX-1100 to the send/return jacks of a mixer or multi-track recorder. Connect the
send jack of the mixer or MTR to the INPUT L/MONO jack of the RFX-1100, and connect the OUTPUT L/R jacks of the
RFX-1100 to the return jacks (or the stereo line input jacks) of the mixer or MTR.
In this configuration, the RFX-1100 should be set so that it outputs only the effect sound, and the balance between
original sound and effect sound should be adjusted at the mixer or multi-track recorder. Supplying the send signal to the
RFX-1100 in stereo is also possible.
ZOOM RFX-1100
* Rack mount screws are
INPUT
R L/MONO
INPUT OUTPUT
L/MONO
L R
not supplied with the unit.
Amplifier/speaker
RFX-1100
Rack Mounting
Getting Connected
Synthesizer or similar
RETURN
L R SEND
Mixer or MTR
5