Safety Precautions; Usage Precautions - Zoom RFX-1000 Operation Manual

Safety Precautions/Usage Precautions

Safety Precautions

In this manual, symbols are used to highlight warnings and
cautions for you to read so that accidents can be prevented.
The meanings of these symbols are as follows:
This symbol indicates explanations about
extremely dangerous matters. If users
Warning
ignore this symbol and handle the device
the wrong way, serious injury or death
could result.
This symbol indicates explanations about
dangerous matters. If users ignore this
Caution
symbol and handle the device the wrong
way, bodily injury and damage to the
equipment could result.
Please observe the following safety tips and precautions to
ensure hazard-free use of the RFX-1000.
• Power requirements
Warning The RFX-1000 is powered by the supplied AC
adapter . To prevent malfunction and safety hazards,
Do not use any other kind of AC adapter.
When using the RFX-1000 in an area with a
different line voltage, please consult your local
ZOOM distributor about acquiring a proper AC
adapter.
• Environment
Caution
Avoid using your RFX-1000 in environments where
it will be exposed to:
• Extreme temperature
• High humidity or moisture
• Excessive dust or sand
• Excessive vibration or shock
• Handling
Caution
The RFX-1000 is a precision instrument. Do not
exert undue pressure on the unit.
Also take care not to drop the unit, and do not
subject it to shock or excessive pressure.
ZOOM CORPORATION
NOAH Bldg., 2-10-2, Miyanishi-cho, Fuchu-shi, Tokyo 183-0022, Japan
PHONE: +81-42-369-7116 FAX: +81-42-369-7115
• Connecting cables and input and output
jacks
Caution
You should always turn off the power to the RFX-
1000 and all other equipment before connecting or
disconnecting any cables. Also make sure to
disconnect all cables and the AC adapter before
moving the RFX-1000.
• Alterations
Caution
Never open the case of the RFX-1000 or attempt to
modify the product in any way since this can result
in damage to the unit.

Usage Precautions

• Electrical interference
The RFX-1000 has been designed to minimize radio
frequency emissions and is highly resistant to external
interference. However, if placed very close to equipment
such as TV sets or radio receivers, reception
interference may occur. If you encounter problems,
move the RFX-1000 further away from the affected
equipment.
Whatever the type of digital control device, the RFX-
1000 included, electromagnetic damage can cause
malfunctioning, and can corrupt or destroy data. Since
this is an ever-present danger, thorough care should be
taken to minimize the risk of damage.
• Cleaning
Use a soft, dry cloth to clean the RFX-1000. If
necessary, slightly moisten the cloth. Do not use
abrasive cleanser, wax, or solvents (such as paint thinner
or cleaning alcohol), since these may dull the finish or
damage the surface.
Please keep this manual in a convenient place for
future reference.
Printed in Japan RFX-1000-5000