Short + Medium + Long Mod. Delay; Reverb - Yamaha Magicstomp Effect List

Short + Medium + Long Mod. Delay

3 band multi tap delay w/3 delay times.
Parameter Display
Wave Form W.F.
Effect Level ELVL
Direct Level DLVL
Direct Pan DPAN
* Edit window no. corresponds to delay band no. and tap no.
Page1:Band1 Tap1, Page2:Band2 Tap1, Page3:Band2 Tap2, Page4:Band2 Tap3,
Page5:Band3 Tap1, Page6:Band3 Tap2, Page7:Band3 Tap3, Page8:Band3 Tap4
Time DTn
Low Cut Filter LCFn
High Cut Filter HCFn
Feedback FBn
Wave WAVn
Phase PHSn
Tap TAPn
Speed SPDn
Depth DPTn
Pan PANn
Level LVLn
Sync SYNn
*n = delay band no.

Reverb

Hall, room, stage, and plate reverb simulations, all with gates.
Parameter Display
Reverb Type TYPE
Initial Delay IDLY
ER/Rev Delay ERDL
Reverb Time TIME
High Ratio HRAT
Low Ratio LRAT
Diffusion DIFF
Density DNST
ER/Rev Balance ERBL
High Pass Filter HPF
Low Pass Filter LPF
Gate Level GATE
Attack ATCK
Hold HOLD
Decay DCAY
Mix MIX
Range
Triangle, Saw Up, Saw Down
0.0 to 10.0
0.0 to 10.0
L10.0 to R10.0
Band1:0.1 to 696.0 ms,
Band2:0.2 to 2180.0 ms,
Band3:0.2 to 2920.0 ms
Off to 10.0
Off to 10.0
0.0 to 10.0
Sine, Other
Normal, Reverse
0 to 100 %
0.0 to 10.0
0.0 to 10.0
L10.0 to R10.0
0.0 to 10.0
1 to 8
Range
Hall, Room, Stage, Plate
0.0 to 500.0 ms
0.0 to 100.0 ms
0.3 to 99.0 s
0.1 to 1.0
0.1 to 2.4
0 to 10
0 to 100%
0 to 100%
Thru, 21.2 Hz to 8.00 kHz
50.0 Hz to 16.0 kHz, Thru
Off, –60 to 0 dB
0 to 120 ms
0.02 to 2040 ms
6 to 44500 ms
0 to 100%
Selects the modulation waveform used for "other" in the Wave Parame-
ter below.
Effect level
Level of direct sound
Pan for direct sound
Delay time (Page1, Page2, Page5 only)
Filter cuts low frequencies (Page1, Page2, Page5 only)
Filter cuts high frequencies (Page1, Page2, Page5 only)
Delay's feedback level (Page1, Page2, Page5 only)
Modulation waveform. Sine wave or other ("other" is the wave selected
in the Wave Form Parameter above).
Phase of the delay
The output time of the delay sound in regard to the time of the delay
loop (see page 31)
Modulation speed (modulation phase if the band is synchronized with
another band)
Modulation depth
Position in the stereo field of the delay sound.
Delay level
Setting to synchronize the modulation of different bands (set to any
number other than the band number of the current band, it will syn-
chronize with that band. If set to the same number as the current band,
it will not synchronize.)
Reverb type
Initial delay before reverb begins
Delay between early reflections and reverb
Reverb time
High-frequency reverb time ratio
Low-frequency reverb time ratio
Reverb diffusion (left–right reverb spread)
Reverb density
Balance of early reflections and reverb
(0% = all reverb, 100% = all early reflections)
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Level at which gate kicks in
Gate opening speed
Gate open time
Gate closing speed
Mix level
15
Description
Description