8 Band Parallel Delay; 8 Band Series Delay - Yamaha Magicstomp Effect List

8 Band Parallel Delay

8-band modulation delay connected in parallel.
Parameter Display
Wave Form W.F.
Effect Level ELVL
Direct Level DLVL
Direct Pan DPAN
* Edit window page no. corresponds to delay band no.
Time DTn
Low Cut Filter LCFn
High Cut Filter HCFn
Feedback FBn
Wave WAVn
Phase PHSn
Tap TAPn
Speed SPDn
Depth DPTn
Pan PANn
Level LVLn
Sync SYNn
*n = delay band no.

8 Band Series Delay

8-band modulation delay connected in series.
Parameter Display
Wave Form W.F.
Effect Level ELVL
Direct Level DLVL
Direct Pan DPAN
* Edit window page no. corresponds to delay band no.
Time DTn
Low Cut Filter LCFn
High Cut Filter HCFn
Feedback FBn
Wave WAVn
Phase PHSn
Tap TAPn
Speed SPDn
Depth DPTn
Pan PANn
Level LVLn
Sync SYNn
*n = delay band no.
Range
Triangle, Saw Up, Saw Down
0.0 to 10.0
0.0 to 10.0
L10.0 to R10.0
0.1 to 696.0 ms
Off to 10.0
Off to 10.0
0.0 to 10.0
Sine, Other
Normal, Reverse
0 to 100 %
0.0 to 10.0
0.0 to 10.0
L10.0 to R10.0
0.0 to 10.0
1 to 8
Range
Triangle, Saw Up, Saw Down
0.0 to 10.0
0.0 to 10.0
L10.0 to R10.0
0.1 to 696.0 ms
Off to 10.0
Off to 10.0
0.0 to 10.0
Sine, Other
Normal, Reverse
0 to 100 %
0.0 to 10.0
0.0 to 10.0
L10.0 to R10.0
0.0 to 10.0
1 to 8
Selects the modulation waveform used for "other" in the Wave Parame-
ter below.
Effect level
Level of direct sound
Pan for direct sound
Delay time
Filter cuts low frequencies
Filter cuts high frequencies
Delay's feedback level
Modulation waveform. Sine wave or other ("other" is the wave selected
in the Wave Form Parameter above).
Phase of the delay
The output time of the delay sound in regard to the time of the delay
loop (see page 31)
Modulation speed (modulation phase if the band is synchronized with
another band)
Modulation depth
Position in the stereo field of the delay sound.
Delay level
Setting to synchronize the modulation of different bands (set to any
number other than the band number of the current band, it will syn-
chronize with that band. If set to the same number as the current band,
it will not synchronize.)
Selects the modulation waveform used for "other" in the Wave Parame-
ter below.
Effect level
Level of direct sound
Pan for direct sound
Delay time
Filter cuts low frequencies
Filter cuts high frequencies
Delay's feedback level
Modulation waveform. Sine wave or other ("other" is the wave selected
in the Wave Form Parameter above).
Phase of the delay
The output time of the delay sound in regard to the time of the delay
loop (see page 31)
Modulation speed (modulation phase if the band is synchronized with
another band)
Modulation depth
Position in the stereo field of the delay sound.
Delay level
Setting to synchronize the modulation of different bands (set to any
number other than the band number of the current band, it will syn-
chronize with that band. If set to the same number as the current band,
it will not synchronize.)
12
Description
Description