Control Panel; Using Your Induction Cook-Top - Wolfgang Puck BIDCIM10 Bistro collection Use And Care Manual

HSN InductionCooker Manual 10/9/07

Control Panel

1 On/Off Button
Press to start the unit.
2 FUNCTION Button
Press to choose between two operating functions:
POWER and TEMPERATURE.
Choose POWER setting to cook foods at different power
settings: 400W (Keep Warm), 600W (Low), 800W (Medium
Low), 1000W (Medium), 1200W (Medium High), or 1400W
(High). Use this setting when cooking foods as you would on a
conventional stovetop.
Choose TEMP setting to cook or keep warm at a specific
temperature: 150F, 200F, 250F, 300F, 350F, or 400F. The
thermostat will cycle on and off to maintain the specific
temperature selected. Use this setting when keeping foods
warm, such as when serving on a buffet.
3 TIMER
Press to set cooking time in hours and minutes, up to 23 hours and
59 minutes. When using the timer, the unit will shut off after set time
has elapsed.
+ -
4
Use these buttons when setting the timer and choosing from various
temperature and wattage settings.
9:35 PM Page 9
9

Using Your Induction Cook-top

1 Place the unit on a level counter or tabletop near an outlet.
2 Insert power cord into outlet. A beep will sound; all indictors will
light up for 1 second and then go out; the LCD will display "1400
Watts", indicating the unit is ready for use.
3 Place a suitable pan on the center of the cook-top.
4 Press ON/OFF button, the display will read
The unit will begin heating at the default power of 1400 Watts, or
HIGH. Adjust wattage by pressing " + " or " – ".
NOTE: If the pan is not placed properly (centered on the cook-top),
the display will read "E0" and a beep will sound. The cook-top will
return to the standby state.
Instead of using a WATTAGE setting, to cook or keep foods warm at
a constant temperature setting, press FUNCTION button once to
choose TEMP function. The default temperature is 400°F, which can
be adjusted by pressing " + " or " – ". When using the TEMP function,
the thermostat will fluctuate on and off to maintain the set temper-
ature.
NOTE: You can change the function from POWER or TEMP by
pressing FUNCTION button at any time during operation.
5 When cooking is complete, press the ON/OFF button. Unplug unit
from outlet. Note that cooking surface may be hot, especially if a hot
pan is left on the surface.
10