Upnp (Universal Plug And Play); Usb Port Detection - ActionTec GT704WG User Manual

UPnP (Universal Plug and Play)

Selecting UPnP in the "Advanced Setup" screen generates the "
this screen, the Universal Plug and Play option is turned on or off by activating the
appropriate circle.
Universal Plug and Play is a zero-configuration networking protocol that allows
hardware and software (such as Netmeeting) to operate more efficiently. If
Netmeeting is not running properly, activate
☞
Note: Activating
ishing with the hardware or software using
ommends deactivating
When finished in this screen, click Apply to activate any changes made.

USB Port Detection

Selecting USB Port Detection in the "Advanced Setup" screen generates the "
Port Detection" screen. In this screen, the
off by activating the appropriate circle (default is "Off"). If this option is turned on,
the port will be disabled if an Ethernet cable is plugged into the Gateway first, or
USB
the Ethernet port will be disabled if the a
If this option is turned on when both an Ethernet and a
the Gateway, the
USB
When finished in this screen, click Apply to activate any changes made.
Chapter 5 Configuring Advanced Settings
n presents a slight security risk. After fin-
UP P
n
UP P
port will be disabled.
n .
UP P
n
UP
.
port detection option is turned on or
USB
cable is plugged into the Gateway first.
USB
USB
45
n " screen. In
UP P
, Actiontec rec-
P
cable are plugged into
USB