Chapter 1 Introduction; Rear Panel; Ethernet Ports - ActionTec GT704WG User Manual

Rear Panel

The rear panel of the Gateway contains seven ports (Ethernet [4], Phone,
Power), as well as Reset and Power switches.
Ethernet Cable
(from Ethernet port [1-4]

Ethernet Ports

The Ethernet ports are used to connect computers to the Gateway via Ethernet
cable. The Ethernet ports are
straight-through or crossover Ethernet cable can be used when connecting to the
ports.
DSL Port
The DSL port is used to connect the Gateway to a
connection.
Reset Switch
Depressing the Reset switch for one second will restore the Gateway's factory
default settings. To reset the Gateway, depress and hold the Reset switch for
approximately one second. The reset process will start after releasing the switch.
USB Port
The port is used to connect a computer to the Gateway via
USB

Chapter 1 Introduction

DSL Cable
(from DSL port
to phone jack)
to computer)
10/100
USB Cable
(from USB port
to computer)
Mbps auto-sensing ports, and either a
DSL
5
USB
Power Adapter
(from Power port
to power outlet)
(Digital Subcriber Line)
cable.
USB
, and