USB
The USB LED illuminates when a USB device is connected via the Gateway's
USB port. This port is not currently operational, but may be enabled in a future
firmware update.
Wireless
The Wireless LED illuminates when the Gateway is connected wirelessly, assum-
ing the Gateway's Wireless feature is turned on.
WPS Button
The WPS button activates WPS (WiFi Protected Setup) on the Gateway. To use
WPS, press the WPS button on the Gateway, then, within two minutes, press the
WPS button on a device you wish to connect to the Gateway's wireless network.
The device will automatically join the Gateway's wireless network. Repeat for
other wireless devices.
Rear Panel
The rear panel of the Gateway features 8 ports (Phone, HPNA, LAN Ethernet,
WAN Ethernet, USB, and Power), as well as a Reset button.
Coaxial Cable
(from Coax Port
to Set Top Box)
Chapter 1 Introduction
Ethernet Cable
Power Adapter
(from LAN Ethernet Port
(from Power Port
to Computer/Device)
to Wall Outlet)
Ethernet Cable
(from WAN Port
to ISP Connection)
5
USB Cable
(from USB Port
to Device)