ActionTec 11 Mbps Wireless Access Point User Manual page 8

Installing the Wireless Access Point
This equipment is designed with the utmost care for the safety of those who install
and use it. However, special attention must be paid to the dangers of electric shock
and static electricity when working with electronic equipment. All guidelines in
this manual and of the computer manufacturer must therefore be followed at all
times to ensure the safe use of the equipment.
Important Notice
lV
This device is a 2.4 GHz low power RF device intended for home and office use in
all EU member states except in France where restrictive use applies. For further
information, refer to "Regulatory notes and statements"
Physical Installation of the Actiontec 11 Mbps Wireless Access Point
For the best performance and range, the Actiontec Wireless Access Point needs to
be placed in an upright vertical position as shown in Figure 4.
Figure 4: Actiontec 11 Mbps Wireless Access Point
Installing the Actiontec Wireless Access Point
7