ActionTec 11 Mbps Wireless Access Point User Manual page 19

able to view the current settings.
Click on 'OK' to lock the Actiontec Wireless Access Point.
At this point, no additional configuration changes to the Actiontec
Wireless Access Point are allowed.
To unlock the Actiontec Wireless Access Point. refer to Frequently Asked
Questions' "Unlocking the Actiontec Wireless Access Point."
Identity
This page displays all the physical information on the Actiontec Wireless Access Point.
To display the 'identity' page, click
V
Here you will be able to make changes to the following settings:
Location: This is a text field in which you can enter where the Access
Point is installed ("Room 412").
You can put any text into this field. The text has no influence on how the
Access Point works.
systems
("admin@domain.com").
You can put any text into this field. The text has no influence on how the
Access Point works.
Mac address: The MAC address is displayed here.
displayed here.
played here.
When you have entered or changed your data:
Click 'Cancel' to discard the changes.
Click 'Apply' to apply the changes to the Access Point.
18
Configuring the Actiontec Wireless Access Point
Contact: This is a text field in which identifies the name of the
administrator
Access Point Type: Information on your type of Access Point is
Firmware version: The version of Access Point firmware is dis-
responsible for the Access Point