ActionTec MI424-WR User Manual page 9

Actiontec Wireless Broadband Router User Manual
Rear Panel
The rear panel of the Router features seven ports (Coax, Ethernet
[4], and Power), as well as a Reset button and Power switch.
LAN
Coax Port
The Coax port connects the Router to the
cable.
Reset Button
To restore the Router's factory default settings, press and hold the Reset button
for approximately ten seconds. The reset process will start about
after releasing the button. When the Router resets, all the lights on the front
panel turn off, and then the lights start flashing. The Router has completed its
reset process when the Power light glows steadily green.
M
Caution: Do not unplug the Power cord from the Router dur-
ing the reset process. Doing so may result in the loss of the
Router's configuration information. If this occurs, reset the
Router again.
C o a x
R e s e t
R e s e t R e s e t
or other devices using a coaxial
ISP
6
, Ethernet
WAN
3 A
5 V D C
O n /O ff
seconds
ten