ActionTec MI424-WR User Manual page 48

STP Click in the device's "
the device. This protocol provides path redundancy while preventing undesir-
able loops in the network.
Action The "Action" column contains an icon that, when clicked, generates the
configuration screen of the particular device.
DNS Server
Domain Name System (
are translated into
the information provided by the
To manually configure
Server Addresses. Specify up to two different
mary, the other secondary.
IP Address Distribution
The " Address Distribution" section of the Configure Network (Home/Office)
IP
screen is used to configure the Router's Dynamic Host Configuration Protocol
( ) server parameters.
DHCP
work devices. If enabled, make sure to configure the network devices as "
Clients." There are three options in this section: Disabled, DHCP Server, and
DHCP Relay.
Disabled Select this option if statically assigning
devices.
DHCP Server To set up the network bridge to function as a
1. Select DHCP Server.
2. Enter the
address at which the Router starts issuing addresses in the
IP
"Start Address" text boxes. Since the Router's default
IP
192.168.1.1, the Start
3. Enter the end of the
es in the "End
Chapter 5 Using Network Connections
" check box to enable Spanning Tree Protocol on
STP
) is the method by which website or domain names
DNS
addresses. Specify such an address manually, according to
IP
.
ISP
server addresses, select Use the Following DNS
DNS
automatically assigns
DHCP
Address must be 192.168.1.2.
IP
address range used to automatically issue
IP
Address" text boxes.
IP
server addresses, one pri-
DNS
addresses to the network
IP
45
addresses to net-
IP
DHCP
server:
DHCP
address is
IP
address-
IP