ActionTec MI424-WR User Manual page 10

Ethernet WAN Port
The Ethernet
WAN
Ethernet LAN Ports (4)
The Ethernet
LAN
ate a local area network (
sensing ports, and either a straight-through or crossover Ethernet cable can be
used when connecting to the ports.
Power Switch
The Power switch powers the Router on and off.
Power Port
The Power port connects the Router to an electrical wall outlet via the
Power cord.
M
Caution: Do not unplug the Power cord from the Router dur-
ing the reset process. Doing so may result in the loss of the
Router's configuration information. If this occurs, reset the
Router again.
Chapter 1 Introduction
port connects the Router to the
ports connect devices to the Router via Ethernet cables to cre-
). The Ethernet
LAN
using an Ethernet cable.
ISP
ports are 10/100 Mbps auto-
LAN
7