Operating A Computer From The Remote Commander - Sony VPL-V500Q Operating Instructions Manual

Operating a Computer from the Remote Commander

When using an IBM PC/AT compatible computer
For details, see the supplied RM-PJ20 operating instructions.
Front
..........................................................................................................................................................................................................
1) IBM PC/AT is a registered trademark of International Business Machines Corporation, USA.
2) NEC is a registered trademark of NEC Corporation.
If you connect the supplied mouse receiver to the mouse port of a
computer, you can operate the mouse function of a computer with the
Remote Commander.
Set the MOUSE/MENU switch to MOUSE when you operate a computer
connected to the mouse receiver from the Remote Commander.
When the MENU/MOUSE switch is set to MOUSE, the MENU, ENTER
keys and joy stick on the Remote Commander function as follows.
Key and joy stick
IBM PC/AT
compatible, NEC
MENU Left button
ENTER (front) Right button
ENTER (rear) Right button
Joy stick Corresponds with the movements of the mouse
Computer
Cable for IBM PC/AT
compatible computer
to mouse port
Use the supplied conversion cable when you
connect to the IBM PC/AT compatible or
Macintosh computer.
Computer
NEC IBM PC/AT compatible
Conversion
compatible computer, PS/2
—
cable
type)
(6-pin˜9-pin)
Note
Be sure that there is nothing to obstruct the infrared beam between the
Remote Commander and the mouse receiver.
Function
1) Macintosh
2)
Mouse button
Mouse button
Mouse button
Cable for IBM (for PC/AT
Mouse receiver
Macintosh
Cable for
Macintosh
(4-pin˜9-pin)
15
(EN)