Using The Menu - Sony VPL-V500Q Operating Instructions Manual

Using the MENU

The projector is equipped with an on-screen menu for
making various adjustments and settings.
To select the language used in the menu, see page
25.
1
Press the MENU key.
The menu display appears.
The menu presently selected is highlighted in blue.
I N P U T - A
V I D E O
INPUT
SELECT I N P U T - A
PICTURE
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL: EXIT: MENU
2
Use the V or v keys on the control panel to select a
menu, then press the b or the ENTER key. On the
Remote Commander, move the joy stick up or
down to select a menu, then move it to the right or
press the ENTER key.
The selected menu appears.
Menus Setting items
V I D E O
C O N T R A S T 8 0
INPUT
B R I G H T 5 0
SELECT
C O L O R 5 0
PICTURE
CTRL H U E 5 0
S H A R P 5 0
INPUT
SETTING D . P I C T U R E : O F F
C O L O R S Y S : A U T O
SET
SETTING
SEL: SET: ENTER RESET: RESET
INPUT
INFO.
EXIT: MENU
3
Make setting or adjustment on an item.
For details on setting individual items, see the relevant
menu pages.
18
(EN)
To clear the menu display
Press the MENU key. The menu display disappears
automatically if no key is pressed for one minute.
To reset items that have been adjusted
Press the RESET key. "Reset complete!" appears on
the screen and the settings appearing on the screen will
be reset to their factory preset values.
About the memory of the settings
The settings other than the INPUT SETTING menu
are automatically stored in the projector memory.
Adjustments made in the INPUT SETTING menu
have to be saved with the SAVE TO MEMORY item
in the INPUT SETTING menu.