Connecting With A Computer Or A Vcr - Sony VPL-V500Q Operating Instructions Manual

Connecting with a Computer or a VCR

For details on the DIP switch setting of
the adapter, see page 36.
to a wall outlet to AC IN
AC power cord
(supplied)
S-Video cable (not supplied)
to S VIDEO OUT
..........................................................................................................................................................................................................
14
1) Macintosh is a registered trademark of Apple Computer, Inc.
(EN)
This section describes how to connect the projector with a computer or a
VCR and external active speakers. For details on how to connect other
equipment, see page 30.
Also refer to the instruction manuals of the equipment to be connected.
When making connections, be sure to:
• turn off all equipment before making any connections.
• use the proper cables for each connection.
• insert the plugs of the cables properly; plugs that are not fully inserted
often generate noise. When pulling out a cable, be sure to pull it out from
the plug, not the cable itself.
Use the supplied adapter when
connecting with a Macintosh 1) computer.
HD D-sub 15-pin cable (supplied)
Front
S VIDEO VIDEO
L (MONO)
VIDEO IN AUDIO IN
to
VIDEO
OUT
VCR
Computer
Audio cable (not supplied)
INPUT A
R
75
ON
OFF
AUDIO IN
Audio cable
(not supplied)
Video cable
(not supplied)
to AUDIO OUT
L R
AUDIO OUT
CONTROL S IN
Active speakers