Connecting A Computer With A Usb Cable; For Windows - Sony VPL-SW620 Operating Instructions Manual

Notes
• The interactive function works by a detector in the projector, which picks up infrared rays emitted
from the tip of the Interactive Pen Device. Observe the precautions noted below.
- Avoid placing the projector where the Interactive Pen detector is directly exposed to fluorescent
light or other strong light.
- Do not cover the pen tip of the Interactive Pen Device or the Interactive Pen detector.
- Infrared data communication or noise from another device may cause improper operation.
• Observe the precautions noted below during the calibration.
- Avoid placing obstacles between the interactive detector and the screen.
- Do not move the projector and the screen.
• If Calibration Auto does not calibrate properly, try the following methods.
- Shield the screen from strong, direct outside light.
- Reduce the ambient light while Calibration Auto is performed.
- If Calibration (Auto) still does not calibrate properly after reducing the lighting as suggested
above, click Calibration (Manual(Main)) or Calibration (Manual(Sub)), then calibrate manually.
- If you use a screen which is not white, Calibration Auto may be inaccurate.
• The maximum screen size at which the Interactive function works is 100 inches.
• Images may not be projected properly depending on the operating environment or the application.
Use Input-A, Input-B, or Input-C to project the images properly.

Connecting a Computer with a USB Cable

Make sure your computer and the projector are connected with a computer cable. For details
on connecting the projector to a computer, see "Connecting the Projector" (page 9).
USB terminal
(Type A)
Computer

For Windows

Installing Interactive Presentation Utility 2
System Requirements
• CPU: Celeron 2.1GHz or faster
• Memory: 256MB or more (512MB recommend)
• Available hard drive space: 1GB or more
• OS:
Windows XP/Vista/Windows 7*
*1: 32bit edition and 64bit edition
1
Close all running applications.
2
Insert the supplied CD-ROM into the CD-ROM drive of the computer.
Open the CD-ROM and double-click "Interactive Presentation Utility 2.exe".
Using Interactive Presentation Utility 2 (VPL-SW635C/SW630C/SW620C only)
Computer cable
1 1
/Windows 8*
45