Mitsubishi DX-PC200 Operation Manual page 90

Notice
Clock adjustment cannot be carried out successfully when the login user has no authority to
change the setting or when the authority to change the relevant recorder's setting is held by
other user.
The default user settings when the recorder is registered to DX-PC200 are used for logging in to
the recorder. If necessary, change the login user manually.
You can also adjust the clock manually using this panel. Click the recorder you want to adjust
in the recorder list and then follow the procedures below while the selected recorder is
highlighted in blue.
<Click the PC's clock button.>
The clock of the recorder selected and highlighted in blue is synchronized with the PC's clock.
<Click the manual clock setting button.>
You can adjust the clock of the recorder selected and highlighted in blue to any time you enter in
the boxes to the left of the button.
Click the Log button to check the log of the time synchronization. You can check the log
related to the time synchronization.
[Time date filter]
You can narrow down the events to be displayed in the list by specifying a period.
[Event log filter]
You can filter the events to be displayed in the list according to the error causes.
90/100