Mitsubishi DX-PC200 Operation Manual page 67

<Information display column>
The currently connected recorder name and IP address are displayed in the upper column.
The currently displayed camera channel number and the registered camera name are
displayed in the lower column.
By selecting a camera with this dropdown list, you can change a camera in display.
<Joystick>
Perform pan and tilt with left-drag of the mouse.
Turn clockwise and counterclockwise with right-drag for zooming operation.
<Preset key>
With a right-click, perform preset registration of the current camera position.
Make a call of preset with a left-click.
<Auto Pan operation area>
AB points registration and speed adjustment bar of the Auto Pan
Notice
Some camera models do not have these functions.
As USB joystick may not be useable, perform sufficient test in advance.
During this operation, live/recorder image playback with the corresponding recorder are
discontinued automatically.
Special functions such as the wiper and light can be allocated to the 12 user function buttons.
With a left-click on the unset button, the dialog below opens. With a click on the [OK] button
after setting, the button name is displayed on the button. With the next left-click, the button
which issues the allocated command is indicated.
Button name
PTZ command : With a click on this button, select a command which you want to issue.
Right-click to change the registered contents of the button which has already been allocated. In
the same way, the setting dialog opens.
: Enter the desired characters on the button.
Keep in mind that the number of characters is limited.
67/100