Table of Contents
Advertisement
Connections for Various Functions
Connecting with CCTV camera, monitor and sensor
MICROPHONE
Note
•
Monitor to be connected
– Connecting with a CCTV monitor (for surveillance) is recommended.
– Connecting with some monitors may cause picture vibration and/or picture distortion at the top or bottom of the image at still
picture or normal playback.
– A television for domestic use may easily cause the picture vibration and distortion.
•
CCTV camera to be connected
– Do not connect 'Color' and 'Black & White' cameras together.
•
When both S-VIDEO IN terminal and VIDEO IN terminal are connected with the CCTV camera, the signal through S-VIDEO IN
terminal is given priority.
Alarm Recording Connection
The alarm can be confirmed from a distance by connecting the
ALM OUT terminal with an existing alarm system panel or other
peripherals such as a buzzer. Connect the VCR and other
peripherals as to the right. (
and page 37 for the rating of each terminal)
26
Installation
One of either codes
should be connected.
SENSOR
GND
ALM IN
ALM
RST
REC GND ALM
MODE
CLK
IN
OUT
REMOTE
MIC
IN
OUT
IN
AUDIO
AUDIO
MIC
OUT
IN
One of either codes
should be connected.
page 11 for the menu setting
CCTV CAMERA
VIDEO OUT
S-VIDEO
OUT
VIDEO
S-VIDEO
IN
IN
CALL
OUT
IN
OUT
RESET
VIDEO
S-VIDEO
S-VIDEO OUT
VIDEO
S-VIDEO IN
OUT
VIDEO IN
AUDIO IN
Alarm reset switch
ALM
RST
REC GND ALM
IN
Alarm set switch
Note
A point to notice
MONITOR
External alarm lamp
and buzzer
MODE
CLK
CALL
OUT
Supplementary information
Info.
Advertisement
Table of Contents
