Connecting A Video Device (Composite Video/S Video Device)/Stereo Amplifi Er - Mitsubishi LDT55IV User Manual

54.6" lcd display monitor
Table of Contents

Advertisement

P-4
Connection procedure (continued)
Connecting a video device (composite video/S video device)/stereo amplifi er
This monitor can be connected to a stereo amplifi er.
Refer to the user's manual of the stereo amplifi er for details. (Cables shown in the fi gure below are commercially available.)
To connect a video device to the VIDEO IN connector (VIDEO IN or S-VIDEO IN) on the monitor, use a BNC cable, a video
cable, or an S video cable. For connection to the audio input connector on the monitor, use an audio cable (RCA). Connect the
connectors of the audio cable (RCA) correctly. For connection to the VIDEO IN connector, select [VIDEO] using the INPUT button
on the monitor or the VIDEO button on the wireless remote control. For connection to the S-VIDEO IN connector, select [VIDEO<S>]
using the INPUT button on the monitor or the VIDEO(S) button on the wireless remote control.
To connect two monitors, connect one end of a BNC cable to the VIDEO OUT connector of the fi rst monitor and the other end to
the VIDEO IN connector of the second monitor.
NOTE:
When different monitors need to be adjusted so that their tint can be identical, such as when using multiple screens, it is
recommended to use a signal distributor (commercially available).
When connecting a stereo amplifi er to the monitor, be sure to turn off the power of the stereo amplifi er. For connection to the
audio output connector on the monitor, use an audio cable (RCA). Connect the connectors of the audio cable (RCA) correctly. Be
sure to turn on the monitor fi rst, and then turn on the stereo amplifi er.
The selected audio input signal is output from the AUDIO OUT connector.
NOTE:
To connect the device to VIDEO IN connector (BNC, RCA), use either of them.
Left side of monitor (fi rst monitor)
AUDIO OUT
VIDEO OUT
BNC cable
Audio cable (RCA)
BNC cable
Video cable
AUDIO IN2
VIDEO IN
VIDEO IN
S-VIDEO IN
LCD monitor (second monitor)
VIDEO IN
Audio cable (RCA)
To audio output
To video output
To video output
To S video output
S video cable
Front of LCD monitor
(fi rst monitor)
(Multi-connection)
English-21
Video device
(composite video/S video device)
Stereo amplifi er
To audio input
External speakers

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D2010

Table of Contents