C22.2 No. 60950-1. CAN/CSA FCC Information 1. Use the attached specified cables with the DiamondPoint V51LCD (L154F0), DiamondPoint V71LCD (L174F1), or DiamondPoint V91 LCD (L194F2) color monitor so as not to interfere with radio and television reception. (1) Please use the supplied power cord or equivalent to ensure FCC compliance.
• Video Signal Cable • Base Stand • Cable Holder Power Cord Video Signal Cable DiamondPoint V51LCD/V71LCD/V91LCD User’s Manual * Remember to save your original box and packing material to transport or ship the monitor. DP51V71V91VManual112304.p65 DiamondPoint LCD Monitor (Stand not connected)
15-pin mini D-SUB signal cable to the Macintosh cable adapter (Figure A.2). Tighten all screws. NOTE: To obtain the Macintosh cable adapter, call NEC-Mitsubishi Electronics Display of America, Inc. at (800) 632-4662. 3. Connect the 15-pin mini D-SUB of the video signal cable to the appropriate connector on the back of the monitor (Figure B.1).
Page 6
Quick Start –continued Figure A.1 Power Cable Figure B.1 Figure C.1 DP51V71V91VManual112304.p65 Figure A.2 Note: Some Macintosh systems do not require a Macintosh Cable Macintosh Cable Adapter Adapter (not included) Input (VGA) Cable holder 11/29/04, 3:36 PM Power button...
Page 7
Quick Start –continued Tilt Grasp both sides of the monitor screen with your hands and adjust the tilt as desired (Figure TS.1). NOTE: Handle with care when tilting the monitor screen. Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1.
100 mm (V71LCD) 100 mm (V91LCD) 75 mm (V51LCD) 100 mm (V71LCD) 100 mm (V91LCD) Weight of LCD assembly: 2.8 kg - V51LCD (MAX) 4.2 kg - V71LCD (MAX) 5.5 kg - V91LCD (MAX) 11/29/04, 3:36 PM Thickness of Bracket (Arm) 2.0~3.2 mm...
Controls OSD (On-Screen Display) control buttons on the front of the monitor function as follows: 1. Basic key function Button SELECT OSD displayed OSD Off OSD On Go to Adjustment Cursor moves left (Icon selection stage stage) Go to Icon selection OSD On stage (Adjustment...
Page 10
Controls –continued BRIGHTNESS Adjusts the overall image and background screen brightness. CONTRAST Adjusts the image brightness in relation to the background. AUTO CONTRAST Adjusts the image displayed for non-standard video inputs. AUTO ADJUST Automatically adjusts the Image Position, H. Size and Fine setting. LEFT/RIGHT Controls Horizontal Image Position within the display area of the LCD.
Page 11
Controls –continued EXIT Selecting EXIT allows you exit OSD menu/sub menu. LANGUAGE OSD control menus are available in seven languages. OSD TURN OFF The OSD control menu will stay on as long as it is in use. In the OSD Turn OFF submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSD control menu.
As with all personal display devices, NEC-Mitsubishi Electronics Display recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle, or turning off the monitor when not in use.
Page 13
Recommended Use CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level.
800 x 600* at 56 Hz to 75 Hz 832 x 624* at 75 Hz 1024 x 768 at 60 Hz to 75 Hz ... NEC-Mitsubishi Electronics Display cites recommended resolution at 75 Hz for optimal display performance. 304.1 mm/12.0 inches 228.1 mm/9.0 inches...
Page 15
1152 x 864* at 70 Hz 1152 x 870* at 75 Hz NEC-Mitsubishi Electronics Display cites 1280 x 960* at 60 Hz to 75 Hz recommended resolution at 60 Hz for 1280 x 1024 at 60 Hz to 75 Hz... optimal display performance.
Page 16
1152 x 864* at 70 Hz 1152 x 870* at 75 Hz NEC-Mitsubishi Electronics Display cites 1280 x 960* at 75 Hz recommended resolution at 60 Hz for 1280 x 1024 at 60 Hz to 75 Hz... optimal display performance.
Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The monitor’s small footprint and low weight allow it to be moved or transported easily from one location to another. AccuColor ®...
For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image. NOTE: As with all personal display devices, NEC-Mitsubishi Electronics Display recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
References NEC-Mitsubishi Monitor Customer Service & Support Customer Service and Technical Support: (800) 632-4662 Parts and Accessories/Macintosh Cable Adapter: Warranty Information: Online Technical Support Sales and Product Information Sales Information Line: Canadian Customers: Government Sales: Government Sales email: Electronic Channels World Wide Web: Product Registration: European Operations:...
Product may vary. Therefore, suitability of a Product for a specific purpose or application must be determined by consumer and is not warranted by NMD-A. For the name of your nearest authorized NEC-Mitsubishi Electronics Display service facility, contact NEC-Mitsubishi Electronics Display of America at 1-800-632-4662. DP51V71V91VManual112304.p65...
TCO’99 Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
Page 22
TCO’99 –continued accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur. TCO’99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound chlorine and bromine. Flame retardants are allowed in the printed circuit boards since no substitutes are available.
Page 23
Declaration of the Manufacturer We hereby certify that the color monitor DiamondPoint V51LCD (L154F0) , DiamondPoint V71LCD (L174F1), or DiamondPoint V91LCD (L194F2) Council Directive 73/23/EEC: Council Directive 89/336/EEC: and marked with NEC-Mitsubishi Electric Visual DP51V71V91VManual112304.p65 are in compliance with – EN 60950-1 –...
CAN/CSA C22.2 No. 60950-1. Informations FCC 1. Utiliser les câbles spécifiés fournis avec les moniteur couleur DiamondPoint V51LCD (L154F0), DiamondPoint V71LCD (L174F1) au DiamondPoint V91LCD (L194F2) afin de ne pas provoquer d'interférences avec la réception radio et télévision.
• Trous à l’avant de la base Cordon d'alimentation Câble pour le signal vidéo DiamondPoint V51LCD/V71LCD/V91LCD Manuel de l’utilisateur * Ne pas oublier de conserver la boîte et le matériel d'emballage d'origine pour transporter ou expédier le moniteur. DP51V71V91VManual112304.p65 Moniteur DiamondPoint LCD (Socle non connect )
(Figure A.2). Serrez toutes les vis. NOTA : Pour obtenir un adaptateur de câble Macintosh pour le appelez NEC-Mitsubishi Electronics Display of America, Inc. au (800) 632-4662. 3. Branchez le mini-connecteur D-SUB à 15 broches de câble vidéo aux connecteurs appropriés à...
Page 27
Mise en marche rapide Figure A.1 Cordon d'alimentation Figure B.1 Figure C.1 DP51V71V91VManual112304.p65 (suite) Figure A.2 Remarque: Certains systémes Adaptateur Macintosh ne nécessitent pas un Macintosh adaptateur de câble Macintosh. (non fourni) Input (VGA) Étrier de câble d’alimentaion 11/29/04, 3:36 PM Bouton...
Page 28
Mise en marche rapide Incliner Attrapez des deux mains l’écran du moniteur par les deux côtés et réglez l’inclinaison et l’orientation selon votre goût. (Figure TS.1) NOTA: manipulez avec soin en inclinant l’écran de moniteur. Enlever le support du moniteur pour le montage Pour préparer le moniteur à...
Page 29
100 mm (V71LCD) 100 mm (V91LCD) 75 mm (V51LCD) 100 mm (V71LCD) 100 mm (V91LCD) Poids of assemblee: 2,8 kg - V51LCD (MAX) 4,2 kg - V71LCD (MAX) 5,5 kg - V91LCD (MAX) 11/29/04, 3:36 PM L‘épaisseur de parenthése (Arme)
Commandes Les boutons de réglage OSD situés sur l’avant du moniteur fournissent les fonctions suivantes : 1. Fonction de la touche de base Button SELECT Raccourci à la fenêtre OSD affiché Arrêt OSD de réglage de luminosité OSD en Permet de se Le curseur se marche déplace vers la...
Page 31
Commandes (suite) LUMINOSITÉ Règle la luminosité de l'image générale et de l'écran d'arrière-plan. CONTRASTE Règle la luminosité de l'image par rapport à l'arrière-plan. RÉGLAGE AUTO Règle l’image affichée pour les modes vidéo non standard. RÉGLAGE AUTOMATIQUE Règle automatiquement la position, le format horizontal ou la résolution fine. GAUCHE/DROITET Contrôle la position horizontale de l’image dans la zone d’affichage du LCD.
Page 32
Commandes (suite) EXTINCTION DE L’OSD Le menu de l’OSD restera actif aussi longtemps que vous l’utiliserez. Dans le menu d’extinction de l’OSD, vous pouvez choisir le temps que mettra l’affichage pour s’effacer après la dernière pression sur une touche. Les temps préréglés sont de 10-120 secondes.
être mis hors tension pendant une heure pour effacer l’image. NOTA: Comme pour tous les équipements d’affichage personnels, NEC-Mitsubishi Electronics Display recommande l’utilisation d’un économiseur d’écran mobile à des intervalles réguliers, à chaque fois que l’écran est en veille, ou d’éteindre le moniteur lorsqu’il n’est pas utilisé.
Page 34
Usage recommandé LA MODIFICATION DE LA POSITION ET DU RÉGLAGE DU MONITEUR PEUT RÉDUIRE LA FATIGUE DES YEUX, DES ÉPAULES ET DE LA NUQUE. OBSERVER LES DIRECTIVES CI-APRÈS LORS DU POSITIONNEMENT • Pour une performance optimale, laissez le moniteur se réchauffer pendant 20 minutes. •...
832 x 624* @ 75 Hz 1024 x 768 @ 60 Hz à 75 Hz ... NEC-Mitsubishi Electronics Display recommande une résolution à 75 Hz pour des performances d'affichage optimales et couleurs. 304,1 mm/12,0 pouces...
Page 36
1152 x 864* @ 70 Hz 1152 x 870* @ 75 Hz NEC-Mitsubishi Electronics Display 1280 x 960* @ 60 Hz à 75 Hz recommande une résolution à 60 Hz pour des 1280 x 1024 @ 60 Hz à 75 Hz... performances d'affichage optimales et couleurs.
Page 37
@ 60 Hz à 75 Hz 1152 x 864* @ 70 Hz 1152 x 870* @ 75 Hz NEC-Mitsubishi Electronics Display recommande une 1280 x 960* @ 75 Hz résolution à 60 Hz pour des performances 1280 x 1024* @ 60 Hz à 75 Hz...d'affichage optimales et couleurs.
Fonctions Encombrement réduit : Constitue la solution idéale pour les environnements qui nécessitent une image de haute qualité et un encombrement et un poids limités. L’encombrement réduit et le faible poids du moniteur permettent de le déplacer ou de le transporter rapidement d’un point à...
Dépannage Pas d'image • Le câble vidéo doit être bien connecté à la carte d'affichage et à l’ordinateur. • La carte d'affichage doit être insérée à fond dans son logement. • Les interrupteurs d’alimentation du moniteur à l’avantet de l’ordinateur doivent être sur la position MARCHE.
Références Service à la clientèle et assistance technique du moniteur NEC-Mitsubishi Service à la clientèle et assistance technique: (800) 632-4662 Télécopieur: (800) 695-3044 Pièces et accessoires/adaptateur de câble Macintosh: Information sur la garantie: Assistance technique en ligne Ventes et information produit Ligne d’information sur les ventes: Clientèle canadienne: Ventes au gouvernement:...
à l ’autre. Par conséquent, l’adéquation d’un produit à un besoin ou une application spécifique doit être déterminée par le consommateur et n’est pas garantie par NMD-A. Pour connaître le nom du centre de service technique agréé NEC-Mitsubishi Electronics Display le plus proche, appeler NEC-Mitsubishi Electronics Display of America au 1-800-632-4662.
TCO’99 (C’est une traduction de portion Anglaise de TCO’99.) Félicitations! Vous avez acheté un produit qui répond à la directive TCO’99. En choisissant ce produit conçu pour une utilisation professionnelle, vous contribuez aussi à la réduction des effets nuisibles sur l’environnement et aussi au développement continu de produits électroniques respectueux de l’environnement.
Page 43
TCO’99 (suite) organiquement liés. Les retardateurs de flame sont autorisés dans les cartes à circuits imprimés étant donné qu’aucun substitut n’est encore disponible. Plomb** Le plomb peut être présent dans les tubes cathodiques, les écrans, les soudures et les condensateurs. Le plomb s’attaque au système nerveux et, à...
Page 44
Déclaration du fabricant Nous certifions par la présente que les DiamondPoint V51LCD (L154F0), DiamondPoint V71LCD (L174F1), au DiamondPoint V91LCD (L194F2) la directive 73/23/EEC du Counseil: – EN 60950-1 la directive 89/336/EEC du Counseil: – EN 55022 – EN 61000-3-2 – EN 61000-3-3 –...
Page 45
à condition que ces droits n'ont pas été directement délivrés à d'autres. Les produits de NEC-Mitsubishi Electronics Display of America dont il est question dans ce document sont garantis conformément aux termes de la déclaration de garantie limitée accompagnant chaque produit. Cependant, les performances réelles de chaque produit dépendent de facteurs tels que la configuration du système, les données du client...
The information disclosed in this document, including all designs and related materials, is the valuable property of NEC- Mitsubishi Electronics Display of America and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use and sales rights thereto, except to the extent said rights are expressly granted to others.