Mitsubishi Electric DLP XD700U User Manual page 14

Basic connections (continued)
Projector + Computer
For computer with mini D-SUB
COMPUTER/
COMPONENT
VIDEO IN
AUDIO AUDIO IN-1
OUT or IN-2
Audio cable (option)
For analog connection:
1. Connect one end of the supplied computer cable to the COMPUTER/COMPONENT VIDEO IN terminal (1, 2) of the
projector.
2. Connect the other end of the computer cable to the monitor port of the computer.
For monitor connection:
Connect the computer cable from the monitor to the MONITOR OUT terminal of the projector.
the monitor.
terminal outputs signals during standby mode.
Important:
projector. Contact your dealer for further information.
connected computer and prepare a proper cable for connection. Some computers don't have the audio output
terminal.
For Macintosh
information.
dealer for further information.
About DDC
The COMPUTER/COMPONENT VIDEO IN-1 terminal of this projector complies with the DDC 1/2B standard. When a
computer supporting this standard is connected to this terminal, the computer will automatically load the information
from this projector and prepare for output of appropriate images.
wall outlet first, and then boot up the computer.
Computer cable
Necessary when outputting to both
a PC monitor and the projector.
MONITOR OUT
PC audio cable (option)
EN-14
Computer
Computer cable (option)
To PC audio output
To monitor port