Memory Copy - Mitsubishi Electric DLP PH50 series Manual

4.4.6. Memory copy

You can copy a registered input or display memory data to other
memory numbers or other cubes.
1. Click "Memory Copy" in "Edit" menu. "Memory Copy" window
comes up.
2. Input the original panel ID to be copied
in "ID number" in "Source".
3. Check "Input Memory" or "Display
Memory" in "Source" to designate the
memory to be copied.
4. Click "Read" button in "Source" to
update the memory list synchronized
with the cube data.
5. Select the memory to be copied in the
memory list.
6. Input the destination ID in "ID number"
in "Destination".
7. Click "Read" button in "Destination" to
update the memory list synchronized with the cube data.
8. Select the destination memory number in the memory list. Or input it directly in "Target
Memory Number".
9. Check or uncheck "Without Input Level Parameter of A/D". You can choose to include AMP
GAIN (on page 52 or 59) values in the copying data. Check it when you don't include it.
10. Click "Copy" button.
111
REV 2.4