Battery Installation - Fisher-Price POWER WHEELS P8990 Owner's Manual & Assembly Instructions

IMPORTANT! Use only a Power Wheels
rechargeable battery. Use of any other battery will damage
your vehicle. Make sure that you charge the battery for at least
18 hours using the enclosed Power Wheels
before operating your vehicle for the first time. Charge the
battery for at least 14 hours after each use of the vehicle.
Never charge the battery longer than 30 hours. Failure to
follow these instructions may damage your battery and will
void your warranty.
1
• Press the tab under the back of the seat and lift to remove
the seat.
Slot
2
• Squeeze the battery retainer arms together to release them
from the slots in the vehicle.
• Press the battery retainer arms in and over the lock tabs and
lift the battery retainer.
16

BATTERY INSTALLATION

® 6 volt lead-acid
® 6 volt charger
Seat
Tab
Slot
Battery Retainer
Arms
6V Battery
3
• Place the battery upright in the battery compartment.
• Place the foam spacer in the battery compartment, behind
the battery.
• Plug the battery connector and motor harness connector
together. Push firmly to make sure the two connectors are
completely joined.
Slot
Arm
4
• Lower the battery retainer over
the battery.
• Fit the battery retainer arms down into the slots in the vehicle.
• Press the battery retainer arms out over the lock tabs to snap
and secure the battery retainer arms in the slots.
• Re-assemble the vehicle seat.
Motor
Harness
Connector
Slot
Arm
P8990b-0920 P8990b-0920