Table of Contents
Advertisement
ASSEMBLY
1 8
• Insert six #6 x 1" screws through the back handlebar assembly,
as shown. Tighten the screws.
19
• Fit a hand grip onto each end of the handlebar. If it is difficult
to slide the hand grips onto the handlebar, moisten the hand
grips with warm water first.
14
DECORATION
Proper label application will help to keep the labels
looking their best! When applying labels, keep the
following guidelines in mind:
• Wash your hands before applying the labels.
• Before applying the labels, wipe the surface of the vehicle
with a clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations.
• For best results, avoid repositioning a label once it has
been applied to the vehicle.
• After applying a label, rub the label firmly with a clean,
dry cloth to make sure the label is adhered to your vehicle.
Start at the center of a label, and smooth towards the outer
edges to remove air bubbles.
DASH AND REAR VIEW
14
mph
Km/h
8
9
TM
P8990b-0920
Advertisement
Table of Contents
