Fisher-Price POWER WHEELS P8990 Owner's Manual & Assembly Instructions page 13

1 4
• Fit the handlebar assembly onto the end of the steering
column. Make sure the handlebar grip area points towards the
rear of the vehicle.
1 5
3
• Insert the #10 x / " screw through the hole in the end of the
4
steering column, so that the screw head faces the rear of
the vehicle.
• Fit the #10 lock nut onto the end of the screw. Make sure the
rounded side of the lock nut faces forward.
• While holding the lock nut steady with an adjustable wrench
(or pliers), tighten the screw.
P8990b-0920
ASSEMBLY
Steering
Column
Handlebar
Assembly
#10 Lock
Nut
3
#10 x / " Screw
4
Rounded
Side
Handlebar
Handlebar
1 6
• Fit the front handlebar assembly into the front of the handlebar.
1 7
• Now, fit the back handlebar assembly to the front
handlebar assembly.
1
• Insert two #6 x / " screws into the two top, center holes in the
2
back handlebar assembly, as shown. Tighten the screws.
Front
Housing
Back
Handlebar
Assembly
P8990b-0920
13