Fisher-Price POWER WHEELS P8990 Owner's Manual & Assembly Instructions page 10

Hubcap
Cap Nut
Cap Nut
Assembly Tool
4
7
• Slide a / " washer onto the rear axle.
16
• Slide the rear wheel driver onto the rear axle. Make sure the
rear wheel driver fits onto the pins in the motor assembly.
• Slide a wheel onto the rear axle. Make sure the ribs on the
wheel fit into the grooves on the rear wheel driver.
• Slide a hubcap, indented side out, onto the rear axle.
• Fit a .437 cap nut on the end of the rear axle.
• Fit the cupped end of the cap nut assembly tool over the cap
nut. Tap the end of the cap nut assembly tool with a hammer
to secure the cap nut on the end of the rear axle.
Hint: You may need the help of another adult to support the
other end of the rear axle while you tap the cap nut assembly
tool with a hammer.
10
Motor Assembly
Rear Axle
7
/ " Washer
16
Rear Wheel
Driver
ASSEMBLY
Ring End
Hubcap
Cap Nut
Assembly
Tool
5
• Face the front end of the vehicle.
7
• Slide a / " washer onto one of the front axles.
16
• Slide a round bushing, ring end first, onto the front axle.
• Slide a wheel (ribbed side first) onto the front axle.
• Slide a hubcap (indented side out) onto the front axle.
• Fit a .437 cap nut on the end of the front axle.
• Fit the cupped end of the cap nut assembly tool over the cap
nut. Tap the end of the cap nut assembly tool with a hammer
to secure the cap nut on the end of the axle.
• Repeat this procedure to assemble a
bushing, wheel, hubcap and cap nut to the other front axle.
Front Axle
Wheel
Cap Nut
7
/ " washer, round
16
7
/ "
16
Washer
Round
Bushing
P8990b-0920
P8990b-0920